The Main X6 Installation needs to be installed first and can be found here.  The MU1 Update installs on top of X6.  Simply run the exe below and Mastercam will update.

Please select the corresponding link to the version of X6 you have installed.

Direct Link to Download Mastercam X6 MU1 64 bit

Direct Link to Download Mastercam X6 MU 1 32 bit

Note:  You must have an active maintenance contract as of 2/28/2012 in order to run X6 MU1.  If you are not current on maintenance and would like to run X6 MU1, please contact sales.

Please click on the video to view in Youtube if you want to watch the video in HD.

Thanks for watching!

We invite you to join us for our Mastercam X6 What’s New Webinar.

A brief list of some of the enhancements that will be covered:

• Native 64 Bit Support
• Stock Model Improvements
• Tool Library Improvements
• 2D HST (High Speed Toolpath) Enhancements
• New 3D Opti-Rest HST Toolpath and 3D HST Enhancements
• Largest Set of Lathe Enhancements since the release of Mastercam X
• Wire Enhancements

Mastercam X6 is available to download for all customers currently on maintenance.

Please see this page here to download:

http://www.shopwareinc.com/support/mastercam-install-help/

That page also has information on how to install and migrate your files from older versions of Mastercam.

Please contact technical support if you have issues.

Posted 7/27/11

Position Summary:

• 3+ years minimum of recent programming & cnc operating experience.
• 2D and 3D solids and surface part models as well as thermo-form mold work
• Set-up and operation of 2010 Haas VMC
• Must be proficient in programming and machining complex parts that require multi-axis operations.
• Work is contract only on a job-by-job basis

Please See this PDF for more info and how to apply.

Thanks for looking!

Mastercam Robotmaster Informational Presentation from ShopWare2 on Vimeo.

Please click the button to register

Robotmaster V5 is all new for Mastercam X5. Robotmaster seamlessly integrates robot programming, simulation and code generation inside Mastercam, delivering quicker robot programming. Create simple or complex robot trajectories accurately without teaching points using Mastercam Mill or Router. The programming of the robot trajectory is done graphically using the same process and tools used for CNC machines, by selecting geometry (lines, arcs, part edges and/or 3D part). Once the geometry is selected, parameter boxes guide the user in making the proper selection of process information. The software automatically generates the robot trajectory based on the above information.

Robotmaster V5 is all new for Mastercam X5. Robotmaster seamlessly integrates robot programming, simulation and code generation inside Mastercam, delivering quicker robot programming. Create simple or complex robot trajectories accurately without teaching points using Mastercam Mill or Router. The programming of the robot trajectory is done graphically using the same process and tools used for CNC machines, by selecting geometry (lines, arcs, part edges and/or 3D part). Once the geometry is selected, parameter boxes guide the user in making the proper selection of process information. The software automatically generates the robot trajectory based on the above information.

For more information on Robotmaster, please visit their site here: http://www.robotmaster.com

We look forward to seeing you there.

Are you confused on how to use planes, WCS, and work offsets in Mastercam Mill Level 1 or 3? We will explain all of these concepts and demonstrate how to use them in this one day workshop. If you are asking yourself the questions listed below then this is the class for you. How do I use one part model inside a Mastercam file to create one or more g-code programs for all sides of my part? What is a Work Coordinate System, how do I use it, and when do I need to change it? What is C-plane and T-Plane, how do I create a plane or WCS, and how do I use them? How do I get Mastercam to output different work offsets for multiple vises or fixtures on the machine table?

First class is being held Monday August 1st.  Contact Us to reserve your spot today! Cost for this 1 Day class is $375.

Presenters include a Solidworks corporate product Manager, Mastercam’s corporate sales team, and one of Shopware’s very own Mastercam for Solidworks customer that is VERY satisfied with the product.  Come see what the buzz is all about and register today!

Click Here to Regiser for the Webinar.

Webinar is on  Friday May 20th @ 1PM CST.

We are expereinceing some technical difficulties with our embedded player.

Please click the link here to watch the video.